Product Manual

CareCenter MD 1.0 70-00533-02 A
12-5
CareCenter MD Online display
CareCenter MD Online display
You can change how CareCenter MD Online displays the acquisitions.
Note: The display settings are not saved in CareCenter MD Online.
Changing the ECG parameters
In the header, the selected lead program is indicated on the left.
Table 12-1: Changing ECG Parameters
To... Do this...
Change the speed
• Click to decrease the speed or
click
 to increase the speed.
• Alternatively, right-click in the ECG and select Speed and then
select the speed.
Change the sensitivity
• Click  to decrease the sensitivity or
click
 to increase the sensitivity.
• Alternatively, right-click in the ECG and select Sensitivity and
then select the sensitivity.
Change or hide a lead
Note: These changes are not saved.
1. Right-click on the inscription of the lead to change or to hide.
2. To change a lead, select the lead to display from
now on.
3. To hide the lead, select the ellipsis.
4. To exit without changing a lead, select the
marked entry or click outside the menu in the ECG.
Move a lead position
Note: To prevent channels from being overwritten, you can only
move leads vertically. The changed position is not saved.
1. Left-click the inscription of the lead position.
A scale appears.
2. While holding down the mouse key, move the waveform up or
down to the desired position.
The ruler is automatically hidden after a short time.
3. To immediately hide the ruler, left-click beyond the ruler, or
right-click and select Hide ruler.
Restoring lead positions
Note: You can restore the original positions of all leads. You
cannot restore the leads individually.
1. Display the ruler.
2. Right-click on the lead inscriptions and select Reset lead
positions.