Product Manual

70-00533-02 A CareCenter MD 1.0
11-2
Confirming Tests
Performing confirmation
Confirming or validating the test places a confirmation mark on the test. The
confirmation mark includes the date and full username of the user that confirmed the test.
The system adds the confirmation mark to:
◆ The Remarks dialog box
◆ The Analysis Results window
◆ The Findings section on the printout
If the confirmation fails, verify:
◆ The confirming user is logged into the system as an active user
◆ The password is correct
◆ The user has privileges to confirm the test
For more information about integrated security, see the System Setup Guide.
To confirm a test:
1. Click Confirm or press Ctrl + B.
2. To save and close the report after the confirmation, select Immediately save and close
the test on confirm.
3. Click Confirm.
Note: You must have the appropriate privileges to confirm a test.