Product Manual

70-00533-02 A CareCenter MD 1.0
10-18
Display a Stress Test ECG Record
The Trend panel charts show the workload trend and the ST trends. You can change the
display of the ST Trend panel:
Correct the ST
measurement value
• Position the mouse cursor near the isoelectric line
and correct the ST measurement value.
Move the actual time
• Use the horizontal scroll bar.
• Keep the buttons right or left pressed to display
the average beats continuously in 10-seconds
steps.
ECG windows and trend chart are updated.
To... Do this...
Change the ST values in the
lower Trend chart
• Click the refresh button in the header.
Reposition the window based
on time
• Click on any time to position the blue cursor on this time.
ECG window and averaged beat are updated.
Move the actual time
• Click on the blue line and move the actual time with pressed
mouse button.
ECG window and averaged beat are updated.
Exclude the parameters from
the indication
• Right-click and select the parameters to exclude.
To indicate the values
computed in every 10-second
strip (unsmoothed waveform)
• Right-click and clear the Display smoothed ST-Values.
To see the change of the ST
values during the acquisition
• Right-click and select the Display ST Value relation to
reference.
To... Do this...