Product Manual

70-00533-02 A CareCenter MD 1.0
10-16
Display a Stress Test ECG Record
Tab operation
Use the tabs as described in Selecting strips on page 10-13 to see the ECG strip at the end
of each stage and to mark the respective time in the charts.
In each case, the four charts show a group of measurement values.
1. Right-click in each of four charts and select the parameters to exclude from the
indication.
2. To indicate the values computed in every 10-second section (unsmoothed waveform)
right-click in both ST charts and clear Display smoothed ST-Values.
3. To see the change of the ST values during the acquisition right-click in both ST charts
and select Display ST Value relation to reference.
The whole multi-channel ECG in the upper window can be used for scrolling of the
record or to control the marked sections.
4. Right-click to change Speed, Sensitivity, Sheet or the ECG event labels.