Product Manual

70-00533-02 A CareCenter MD 1.0
10-6
Display a Stress Test ECG Record
Mark and edit an ECG strip of
10 seconds
1. In the title bar, click the Select 10 seconds ECG
icon.
2. Click in the ECG and drag the selected range to
the desired position.
3. Click the Edit button.
The selected strip displays in grey in the time bar
or the rhythm strip. Depending on the speed, the
grey range can be greater or smaller than the
visible range.
Mark and edit an ECG strip of
any length
1. In the title bar, click the Select variable length
ECG. icon.
2. Click in the ECG and drag the marker to select a
strip.
As soon as the selected section is longer than 10
seconds, another mark appears and splits the
selected section. The section on the right marks
10 seconds, which the system automatically
measures and interprets.
3. To correct the beginning and the end of the
selected strip: position the cursor on either
margin, and drag to move the margin.
4. Click Edit and select the function.
Select a strip Use the strips for the evaluation of the test record.
There is a tab for every saved strip.
1. To see the strips one after the other, click the right
and left arrows.
2. Position the pointer on the tab to see the printing
state and the name of the strip.
The system displays the start time as the tab label.
Edit a strip
1. Right-click on a tab or click on a strip in the ECG
and select Edit.
2. Enter a short, clear name or edit the existing name
and click Save.
3. To print or preview this strip, click Print and select
ECG or Averaged Beat.
To change the printing format and the parameters
select Settings | Print....
Table 10-1: Rhythm control functions
To... Do this...