Product Manual

70-00533-02 A CareCenter MD 1.0
7-4
Emergency ECG
Operating steps - overview
The system uses the orange (main) button (or the F2 key) to perform a standard workflow.
Use the orange button (or F2) to start and save a STAT ECG acquisition. Shaded steps are
optional.
Steps Selections
1
Select the test procedure. STAT ECG or STAT Rhythm ECG
Options
If multiple acquisition devices are installed, select the device. Continue or press F2
If using a Bluetooth wireless device, power on the device.
2
Apply the electrodes:
• Incorrectly applied electrodes blink.
• The graphs indicate the hook up quality, check the ECG traces.
Options
Enable the filter only if you cannot achieve sufficient
acquisition quality.
EMG filter
Enter a remark. Remarks or press F3
Start a blood pressure measurement device or enter a blood
pressure value manually.
Blood pressure meter or press
Shift + F3
3
Start the acquisition.
The button is active only if all electrodes are applied correctly.
Start or press F2
Options
Start an acquisition if the electrodes are not applied correctly. Start or press Ctrl + S
Auto Resting ECG: Start the automatic timer if the acquisition
is still in progress. The acquisition starts from the beginning,
the previous acquisition is deleted.
Reset or press Ctrl + R
Auto Rhythm ECG: Prolong an acquisition in progress. The
acquisition is extended by 30 seconds (The previous
acquisition is included.)
Prolong or press Ctrl + R
4
Stop the acquisition manually. Stop or press Ctrl + T
5
Review the acquisition.
Options
Repeat the recording in manual or in automatic mode. Repeat or press Ctrl + S
Repeat Auto or press Ctrl + A
Confirm the diagnosis. The system adds your full name and
the date and time to the diagnosis or to the remark.
Confirm or press Ctrl + B
Preview using the standard formats. Preview or press Ctrl + F
6
Save the record. Save or press F2
Cancel without saving the record. Cancel or press Ctrl + X
7
Print the recording in the standard format. Print or Ctrl + P