Product Manual

70-00533-02 A CareCenter MD 1.0
6-34
Acquire a Stress Test ECG
Review the record
After completion of the stress test the record is displayed for review.
As long as the electrodes are connected to the patient, the running ECG is displayed in the
rhythm line.
For more details, you have more representations.
◆ Click one of the view buttons or select View and select a view.
• Rhythm—representation as shown above
• ECG—complete ECG, multi-channel, averaged beat and trend
• ECG Strip—ECG strip, averaged beat and trend
• Tr e n d —trend charts and complete multi-channel ECG
• ST Trend—trend charts, averaged beat and complete multi-channel ECG
• Summary—result table, ECG strip, averaged beat and trend
Also see Chapter 10, Display a Stress Test ECG Record.
Print the record
See Print the record on page 3-27.
Save the record
After completion of the test, the final default workflow step is saving the test.
1. Click Save or press F2.
Before saving, the system displays a message with the data of the active patient.
If the patient data does not correspond with the real data, you have three seconds to
cancel the saving process.
• Click Cancel.
2. If you find out that a wrong patient was selected, you can select a different patient as
the active patient, select Patient | Select patient....
For bicycle stress tests, the target load is not recomputed.
3. Alternatively, you can click Save or press Shift + F12.
4. If you do not want to save the record click Cancel or press Ctrl + X.
The system prompts you to:
a. Save—save the record for the active patient.
b. Don’t Save—discard the record. No data is saved. The program returns to the
Stress Test Parameters screen.
c. Cancel—cancel the process, to continue viewing the record.