Product Manual

70-00533-02 A CareCenter MD 1.0
6-32
Acquire a Stress Test ECG
a. To accept the indicated value and close the dialog box:
– In the automatic dialog box, click Save (auto in n). (Where n is the countdown
timer.)
– In the manual dialog box, click Save.
b. To correct the values, click in the field and reenter the value.
c. To enter a remark, or select one from a list of predefined texts in the automatic or
the manual blood pressure dialog box.
d. To stop the display of the automatic blood pressure measurement dialog box, select
Don't show this dialogue again, save immediately.
e. To stop the system from taking automatic blood pressure measurements, select Do
not measure BP automatically anymore.
The system prompts you to enter manual blood pressure measurements 45 seconds
before the time that is set in the protocol.
f. To enter the measured blood pressure values manually, enter the value in the
measurement box.
2. To change the settings for the automatic blood pressure measurement during the
exercise:
a. Select Settings | BP....
b. To stop the display of the automatic blood pressure measurement dialog box, clear
Show confirmation dialogue.
c. If the automatic blood pressure meter is disabled, select Prompt for manual BP
measurement.
The system prompts you to enter the blood pressure manually.
3. To stop the treadmill at any time during the test:
a. Inform the patient that the treadmill will be slowing and stopping.
b. Click Stop Belt.