Product Manual

CareCenter MD 1.0 70-00533-02 A
6-21
Stress test controls
Work load control in the bicycle stress test
Feature Description
The upper line shows the target value of the load. Below it, the load
available at the bicycle is indicated. You cannot make changes when
the load is off.
• Click  to increase the load.
• Click  to decrease the load.
The load values in the stage protocol of a bicycle stress test can be
displayed as interpolated values. This function must be enabled.
The system indicates the protocol and the stage in the resting phase.
• Click Next to change to the next stage of the resting phase.
The Next button is active when the protocol is ready for the
second stage in the resting phase.
• Use Select stage label to open a selection box with all stages
defined in the protocol for the resting phase. Click to select a
different label.
The system indicates the protocol and the stage in the exercise
phase.
1. To finish this load stage and change to the next one, click Next.
2. To prolong the load stage, click Hold.
The system changes the color of the Hold button.
The Time in stage indicates the remaining time. See Time in
stage on page 6-10.
3. To stop the hold and continue, clicking Hold or Next again.
To switch off the load, click Stop Load.
To switch on the load, click Start Load.
To quit the stress test prematurely, click End Test.