Owner manual

2190 Boul. Dagenais West TEL: [phone]
LAVAL (QUEBEC) FAX: [phone]
CANADA
H7L 5X9 Email: [e-mail]
INSTALLATION
INSTRUCTIONS
MODEL
450446
VERTICAL
MAGNETIC
SWITCH
Please read these
instructions
carefully. Failure
to comply to
instructions and
designed
operation of
this system,
may void the
warranty.
Electric pump,
check valve and
pipe not included
STEP 1
Fix the switch to the discharge
line using the enclosed clamp.
The clamp should be mounted
approximately 17” above the
base of the pump.
STEP 2
The minimum and maximum
water level adjustments were
done at the factory, for most of
the submersible sump pumps.
You may change the adjustment
by raising or lowering the position
of the metal stoppers.
STEP 3
Plug the switch cable in the
receptacle, then plug the pump
cable in the piggy-back of the
switch cable.
43 cm
17”
 2002 BUR-CAM Printed in Canada 450420