Service manual

26
DISPLAY
TEMP & TORQUE
0 0
36 36°
0 0
67 67°h
TEMP & TORQUE
Press and hold for five seconds the ULTRA and ICE hidden switches to display the TEMP & TORQUE. The tempera-
ture of each cooling drum and the hot gas temperature will toggle back and forth. The auger torque is displayed
continuously. Press and release the ULTRA and ICE hidden switches to return to HOME SCREEN.
The TEMP & TORQUE mode is typically used for service.
CLEAN FILTER
Monthly cleaning of the air filter is recommended. Should the air filter become dirty creating a high temperature
problem, the unit will shut down until service is completed to correct the problem.
NOTE: Severe conditions may require more frequent cleaning.
P3682
NOTE: ULTRA-1 models will display Barrel Temperature and Torque readings on the left side of the display.
40563 110207