TCD-1 TCD-2 INSTALLATION & OPERATING MANUAL With ILLUSTRATED PARTS NOTE: LIFT THE DISPENSER USING THE HANDLES ONLY. DO NOT LIFT THE DISPENSER FROM THE BOTTOM. BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 34106.0001L 11/06 © 2004 Bunn-O-Matic Corporation www.bunnomatic.
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) All equipment other than as specified below: 2 years parts and 1 year labor. 2) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
INTRODUCTION These dispensers are designed to mix liquid tea concentrate with water to produce iced tea by the glass or pitcher. The concentrate can be stored either inside the dispenser, or outside with a hose connection to the dispenser. The dispenser must be placed on a sturdy counter or shelf. PLUMBING REQUIREMENTS This dispenser must be connected to a cold water system with operating pressure between 30 and 90 psi (138 and 620 kPa) from a 1⁄2" or larger supply line.
SET UP AND OPERATING PROCEDURES 1. Remove dispenser from the box and place on a sturdy, level counter. 2. Remove the brass cap and any packing material from the end of the water inlet fitting located on the rear of the dispenser. 3. Attach the 1/4" "L" tube and water strainer to the water inlet fitting, tighten all flare nuts. NOTE: The flow direction arrow on the strainer must point towards the dispenser. 4. Attach a 1/4" water line to the water strainer.
DISPENSER CLEANING AND SANITIZING Daily Cleaning: 1. Turn handle on rear of dispenser to shut off the water supply. 2. Open the faucet to relieve pressure in the system. 3. Since the bag connector(s) have an internal shut off valve, it will be necessary to prop the valve open during cleaning. NOTE: Cutting off the mating connector of an empty concentrate bag works well for this. Keep this mating end for future cleanings of the system. 4. Turn on water supply to the dispenser. 5.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-1) 60 61 63 62 61 47 .375" BIB Adapter 46 Concentrate Bottle Tube 23 27 28 50 21 10 15 18 51 49 19 30 31 32 33 17 16 20 14 13 12 11 10 1 24 2 7 35 34 23 25 36 23 56 6 22 26 58 5 48 38 39 55 37 57 8 29 9 40 41 42 43 3 45 44 4 53 51 52 54 59 P3457.60 34106.
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.0000* 1 Housing (Order item 1) 5 00310.0006 1 Tube Assy, Strainer to Bulkhead 6 00459.0001 1 Fitting, Bulkhead 7 01532.0000 1 Lockwasher, Internal Tooth .438" 8 00463.0000 1 Nut, .438" - 20 9 37689.0000 1 Tube Assy, Bulkhead to Shut-off 10 32891.0001 2 Elbow, Male .25" FLR x .
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-1) (continued) 60 61 63 62 61 47 .375" BIB Adapter 46 Concentrate Bottle Tube 23 27 28 50 21 10 15 18 51 49 19 30 31 32 33 17 16 20 14 13 12 11 10 1 24 2 7 35 34 23 25 36 23 56 6 22 26 58 5 48 38 39 55 37 57 8 29 9 40 41 42 43 3 45 44 4 53 51 52 54 59 P3457.60 34106.
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 27 37786.0001 01360.0002 2 Plate, Fitting Retainer 2 Screw, Plascrew #6 x .375" 28 32631.0000 1 Fitting, Barb .25" 29 32849.0001 2 O-ring 30 32631.0001 1 Fitting, Barb .375" 31 37487.1000 1 Venturi Mixer (Includes item 36) 32 37691.0000 1 O-ring 33 37486.0000 1 Adjustment Screw, Venturi 34 32852.0000 1 O-ring 35 03093.0001 01268.0000 1 1 Wing Nut, Faucet Chrome Nut, Faucet Union (Optional) 36 01221.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-1) (continued) 60 61 63 62 61 47 .375" BIB Adapter 46 Concentrate Bottle Tube 23 27 28 50 21 10 15 18 51 49 19 30 31 32 33 17 16 20 14 13 12 11 10 1 24 2 7 35 34 23 25 36 23 56 6 22 26 58 5 48 38 39 55 37 57 8 29 9 40 41 42 43 3 45 44 4 53 51 52 54 59 P3457.60 10 34106.
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 54 03207.0004 1 Drip Tray 55 38465.0000 1 Decal, Pressure Regulator 56 38466.0000 1 Decal, Shut-off 57 00651.0000 1 Decal, BUNN 58 00656.0000 1 Decal, Plumbing Code 59 38839.0000 1 Stand (Optional) 60 26443.0000 34644.0000 1 1 Reducer, Barb .375" x .25" Connector, Barb .375" x .375" 61 12422.0001 2 Clamp, Hose .59"/.66" 62 37720.0000* 38295.0000* 1 1 Tube, Silicone .375" ID x 3.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-2) 65 66 53 50 51 52 51 Concentrate Bottle Tube 54 .375" BIB Adapter 51 49 Bag Divider 59 24 22 10 17 18 19 20 21 15 1 25 23 19 29 38 37 39 27 5 6 2 7 58 8 33 32 34 35 36 26 16 14 13 12 11 10 30 31 63 61 28 40 51 62 60 9 41 42 43 44 45 46 3 48 4 56 64 57 63 55 47 P3462.60 12 34106.
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.0000* 1 Housing (Order item 1) 5 00310.0006 1 Tube Assy, Strainer to Bulkhead 6 00459.0001 1 Fitting, Bulkhead 7 01532.0000 1 Lockwasher, Internal Tooth .438" 8 00463.0000 1 Nut, .438" - 20 9 37689.0000 1 Tube Assy, Bulkhead to Shut-off 10 32891.0001 2 Elbow, Male .25" FLR x .
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-2) (continued) 65 66 53 50 51 52 51 Concentrate Bottle Tube 54 .375" BIB Adapter 51 49 Bag Divider 59 24 22 10 17 18 19 20 21 15 1 25 23 19 29 38 37 39 27 5 6 2 7 58 8 33 32 34 35 36 26 16 14 13 12 11 10 30 31 63 61 28 40 51 62 60 9 41 42 43 44 45 46 3 48 4 56 64 57 63 55 47 P3462.60 14 34106.
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 30 37786.0001 38044.0000 2 Plate, Fitting Retainer 2 Screw, Plastite #6 x .375" 31 32631.0000 1 Fitting, Barb .25" 32 32631.0001 1 Fitting, Barb .375" 33 32849.0001 2 O-ring 34 37487.1000 1 Venturi Mixer (Includes item 39) 35 37691.0000 1 O-ring 36 37486.0000 1 Adjustment Screw, Venturi 37 03093.0001 01268.0000 2 2 Wing Nut, Faucet Chrome Nut, Faucet Union (Optional) 38 32852.0000 2 O-ring 39 01221.
TCD-1 TCD-2 REPLACEMENT PARTS (TCD-2) (continued) 65 66 53 50 51 52 51 Concentrate Bottle Tube 54 .375" BIB Adapter 51 49 Bag Divider 59 24 22 10 17 18 19 20 21 15 1 25 23 19 29 38 37 39 27 5 6 2 7 58 8 33 32 34 35 36 26 16 14 13 12 11 10 30 31 63 61 28 40 51 62 60 9 41 42 43 44 45 46 3 48 4 56 64 57 63 55 47 P3462.60 16 34106.
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 58 00656.0000 1 Decal, Plumbing Code 59 38130.0000 1 Decal, Faucet Under Pressure 60 38465.0000 1 Decal, Pressure Regulator 61 38466.0000 1 Decal, Shut-off 62 00651.0000 1 Decal, BUNN 63 38278.0002* 2 Edging 36.0" (Order item 74) 64 38839.0000 1 Stand 65 38745.1000 1 Bag Divider (Includes Item 66) 38278.0001* 38278.0003* 1 2 Edging 9.5" (Order item 74) Edging 1.0" (Order item 74) 67 00674.0000 1 Brush, Tube .
ICED TEA DECAL PLACEMENT APPROX. 5“ PLASTIC BODY FAUCET COMPARISON If you have a plastic body faucet of this design, you must order a complete new plastic faucet. New Plastic Faucet Design 18 34106.
