Specifications

Page 38
FACTORY DEFAULTS
This function allows the operator to erase all of the
previously entered recipes and ad messages. Factory-
set default values will replace all previous settings.
EXIT
EXIT
REPLACE
WILL REPLACE ALL
BREW SETTINGS
ARE YOU SURE?
NO YES
FACTORY DEFAULTS
NO YES
Procedure to set factory defaults:
1. Press and hold the ® pad until WARMER OFF
appears. Release the ® pad. Press and release
® until the display reads FACTORY DEFAULTS.
2. Pressing NO in this screen will revert to the MAIN
SCREEN. Press YES to replace the defaults. This
advances to WILL REPLACE ALL BREWING SET-
TINGS. This screen will alternate with ARE YOU
SURE?.
3. Pressing NO in the confirmation screen will revert
to MAIN SCREEN, without resetting the brewing
setups to the defaults. Press YES to load the de-
faults. This will then revert to the MAIN SCREEN,
and the factory default values will replace all
previously entered values. It will NOT reset the
summation Brew counter.
P2312
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
FACTORY DEFAULT VALUES
Brew Lockout NO
DEFAULT (NO NAME) SETTINGS:
Iced Coffee
BREW VOLUME 1800 mL
DILUTION VOLUME 0 mL
PULSE BREW TIME None
PREINFUSION TIME 1st 0:53,OFF 0:45
DRIP OUT TIME 1:00
Hot Coffee Half Batch Full Batch
BREW VOLUMES 900 mL 1800 mL
DILUTION VOLUMES 0 mL 0 mL
PULSE BREW TIMES None None
PREINFUSION TIMES 1st 0:15,Off 1:00 None
DRIP OUT TIMES 0:30 0:45
Iced Tea
BREW VOLUMES 2800 mL
DILUTION PERCENTAGE 53%
PULSE BREW TIMES None
PREINFUSION TIMES None
DRIP OUT TIMES 0:45
ENABLE ADS YES
BREW TEMPERATURE 93˚C (200˚F)
READY TEMPERATURE 91˚C (195˚F)
REFILL 155
SPRAY (Ml/MINUTE) 1160
DILUTE (Ml/MINUTE) 730
FUNNEL LOCKOUT NO
UNITS METRIC
37467 032608