Specifications

Page 23
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
% DILUTION
This function allows adjustment of the amount
of water that flows passed the grounds. The number
signifies the percentage of the brew volume which
does not flow over the coffee grounds/tea.
Modifying recipes - dilution percentages:
Range: 0% to 90% for all batch sizes
NOTE: If the brewer is already in the % DILUTION
screen, it is not necessary to follow steps 1 through
6 in this section, but proceed directly to step 7.
1. Press and hold the ® pad until the display reads
WARMER OFF. Release the ® pad. Press the ®
until the display reads REVIEW RECIPES.
2. Press YES to proceed. The display should now
read NO NAME, along with MODIFY and NEXT.
3. Press and release NEXT to advance to the desired
recipe name to be modified.
REVIEW RECIPES?
NO YES
BATCHES DONE?
NO YES
BATCHES DONE?
NO YES
SET PULSE BREW?
NO YES
BREW MI/M XX.X
(-) DONE (+)
% DILUTION XX
(-) DONE (+)
NO-NAME
MODIFY NEXT
(RECIPE NAME)
MODIFY NEXT
THAT WAS THE
LAST RECIPE
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES TO ALL OTHER
RECIPE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST RECIPE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
SEE MODIFYING
PULSE BREW ON
THE FOLLOWING PAGE
OR PRESS AND RELEASE
ON/OFF PAD TO EXIT THE
% DILUTION SETUP AND
RETURN TO THE MAIN SCREEN
P3214
4. Press and release MODIFY. The display should
read BREW MI/M.
5. Press and release DONE. The display should read
BATCHES DONE?.
6. Press and release YES. The display should now
read % DILUTION, and a batch light will be blinking.
Press and release the batch size to be modified.
7. Using (-) and (+) set the amount of dilution water
(percentage) to be dispensed around the grounds
for that particular batch size.
8. When finished, press another batch size and repeat
step #7 for each batch to be modified.
9. When finished setting all batch sizes, press DONE.
The display should read BATCHES DONE?
10. If they are not correct, press and release NO to
return to the % DILUTION setup screen.
11. If all batch sizes are correct, press YES. This will
advance to SET PULSE BREW. Another alterna-
tive is to press the "ON/OFF/LOWER" pad to exit
the % DILUTION setup and return to the MAIN
SCREEN.
37467 032808