Specifications

Page 20
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET NEW RECIPE - METHOD 3
If not using a Smart Funnel (with a sensor coil) and/or
a Single Multi-BrewWISE DBC Grinder, the brewer
will function as a standard BUNN
Single Multi-Brew-
WISE DBC Brewer:
It is possible to operate the brewer without using
a Smart Funnel and/or a DBC Grinder. If a standard
funnel, or if a non-DBC grinder is used the brewer will
automatically select a NO NAME coffee flavor when
the "BREW" pad is pressed. This means that no name
was read from the funnel's handle.
There is a NO NAME coffee program that can be
set in the brewer. This includes BREW VOLUMES,
DILUTION PERCENTAGES, PULSE BREW TIMES,
PREINFUSION TIMES and DRIP-OUT TIMES. The
brewer will perform in the same capacity as a standard
BUNN Single Multi-BrewWISE DBC Brewer.
The instructions for programming the NO NAME
settings are on the following pages. The same steps
are followed for setting the recipe as those that are
used to MODIFY A RECIPE, beginning on page 21.
Note that when the display reads NO NAME, that
is when MODIFY should be pressed in order to set the
parameters for the NO NAME coffee.
NOTE: Before beginning setup, insert a funnel into
the funnel rails, and place a server beneath the brew
funnel.
REVIEW RECIPES?
NO YES
(RECIPE NAME)
MODIFY NEXT
BREW MI/M. XX.X
(-) DONE (+)
BREW MI/M. XX.X
(-) DONE (+)
NO-NAME
MODIFY NEXT
EXIT TO
NEXT FUNCTION
SCREEN
P3211
37467 032808