Specifications

ICB Training Manual
8
Setup and Programming
Accessing and using the brewer’s programming features is done from the front panel and requires no special tools.
The programming menu is accessed through a hidden switch located on the right side of the display. The hidden
switch on the left side will allow you to scroll backwards.
A. Right Hidden Switch: This is used to access the programming mode and is also used to scroll forward through the
function list.
B. Left Hidden Switch: This is used to scroll backwards through the function list.
C. Digital: This is used to select options (NO/-) that appear on the display during programming.
D. Brewer: This is used to select options (DONE) that appear on the display during programming.
E. Control: This is used to select options (YES/+) that appear on the display during programming.
To exit the programming mode at any time, press and release the Enable Brew ON/OFF button located on the user
interface. The display will return to the main screen.
Programming Lockout
If the programming cannot be access then the programming lockout switch is in the Lock position. The switch is
located on the control board. Remove the top panel, locate the switch and place it into the Unlock position.
Note: The programming lockout switch will be located on the separate memory module board prior to S/N
ICB001330 and located on the main circuit board S/N ICB001330 and after.
Level 1 Programming
Press the hidden switch for one second to access.
This function allows the operator to prevent or allow brewing if the water temperature is
less than the Set Ready temperature.
BREW LOCKOUT ?
NO YESDONE
MEMORY
LOCK UNLOCK
PROGRAMMING
LOCKOUT SWITCH
P3048
ENABLE
ON / OFF
ENABLE
ON / OFF
BREWBREW
®
A
B
READY TO BREW
WATER TEMP: 200°
C
D
E