Manualshelf

Specifications

ManualsBrandsBunn ManualsCoffee MakerICB
11121314151617181920
ICB Training Manual
14
Machine Composition
Exterior Overview
Product Outlets and Removable Parts
User interface (A)•
Display (B)•
Enable Brew On/Off (C)•
Brew Funnel (D)•
Hot water outlet (E)•
Sprayhead (F)•
User Interface
The user interface is a membrane switch adhered to the front of the brewer. The membrane is connected to the
control board assembly by a ribbon cable. The user interface allows the user to select the product, batch size
andtobeginthebrewcycle.Theuserinterfaceanddisplayare5VDCcomponents.
The machine’s display is mounted to the control board assembly. The display is visible on the front of the ma-
chine and provides information to the user and to the technician.
A. Programming (right)
Pressing and holding this pad allows entry into the programming menus. Pressing and releasing the pad steps
through each function screen while in the programming mode.
B. Programming (left)
This hidden pad can be used to scroll backwards through the function list while in programming mode.
C, D, E. Brew (A, B, C) and Function
When the ON/OFF is ON and the brewer is on the main screen (not in programming mode), momentarily press-
ing and releasing this pad will begin a brew cycle. These are also used to program the brewer when in the
programming mode.
F. On/Off Switch
Pressing the “ON/OFF” pad will alternately turn the brewer on and off. Pressing this pad during the brew cycle
willinterruptthebrewcycle,stoppingtheowofwater.Pressingthispadduringprogrammingofthebrewerwill
exit the setup and return to the main screen.
G. Batch Selector Pads
Pressing the pad corresponding to the Half or Full batch selects the amount of product to be brewed. Pressing
a different pad after a brew cycle has been initiated does not change the brew batch in progress. Light indicates
the selected batch to brew. Also used in programming to adjust settings on both batch sizes.
A
B
C
D
E
F