Specifications

Page 9

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

SEL BREWER TYPE

This function allows the operator to select which brewer model this software is installed in.

Procedure for setting the Brewer Type:

1. Press and hold the right hidden switch until the display reads SET LANGUAGE? Press and release the right

hidden switch until the display reads SEL BREWER TYPE. SINGLE or DUAL should be ﬂashing.

2. Select the desired brewer type

NOTE: Changing the BREWER TYPE will restore ALL settings to Factory Default.

3. When done, press right hidden switch to advance to the next programming screen. To exit programming and

return to the Main Screen, press and release the ON/OFF switch (either on DUAL brewers).

SET LANGUAGE?

NO YES

UNITS

METRIC DONE ENG

SEL BREWER TYPE

SINGLE DUAL

UNITS

This function allows the operator to select if numeric settings are displayed in English or Metric units.

Procedure for setting the Units:

1. Press and hold the right hidden switch until the display reads SET LANGUAGE? Press and release the right

hidden switch until the display reads UNITS. The METRIC or ENG should be ﬂashing.

2. Select METRIC to have settings displayed in Metric units. Select ENG to have setting displayed in English

units.

NOTE: Changing the UNIT settings will restore ALL settings to Factory Default.

3. When done, press DONE to advance to the next programming screen. To exit programming and return to the

Main Screen, press and release the ON/OFF switch (either on DUAL brewers).

NOTE: This manual is written based on Factory Default Settings (English Units). If brewer is set for Metric Units,

displays will be different (ex: Brew oz will become Brew ml).

41344 112508