Specifications

Page 8
This function allows the operator to select the language used for the display.
Procedure for setting Language:
1. Press and hold the right hidden switch until the display reads SET LANGUAGE? and release.
2. Press YES to proceed. The display should now read ENGLISH. Using (-) and (+), scroll through the available
languages until the desired language is shown on the display.
3. When finished, press SELECT. If the language selected is different from the current settings,the display will
read CHANGE LANGUAGE? ARE YOU SURE? and then will change to CHANGE LANGUAGE? To convert the
display to the new language, press YES. To retain the current language, press NO.
4. The display should now read SEL BREWER TYPE. To exit programming and return to the MAIN SCREEN,
press and release the ON/OFF switch (either on DUAL brewers).
The functions in the second level of programming allow the operator to adjust brew settings and other feature
options.
To access the level 2 function screens press and hold the right hidden switch for approximately 5 seconds.
Release when the display reads:
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET LANGUAGE
SET LANGUAGE?
NO YES
ENGLISH
(-) SELECT (+)
ESPANOL
(-) SELECCIONE (+)
Scrolls through all
available languages
in memory
SEL BREWER TYPE
SINGLE DUAL
41344 112508