Specifications

Page 4
PROGRAMMING
Using the menu-driven display on the front of the brewer, the operator has the ability to alter or modify various
brewing parameters such as brew temperatures, brew volumes, bypass percentages, pulse brew, etc. This allows
for the precise brewing of various flavors of coffee.
Programming of the brewer is achieved by entering a certain function. Then, by the use of the hidden
programming and function switches, the operator can customize the brewing process to their specifications.
PROGRAMMING SWITCHES
To access the programming mode, and to scroll through the different function screens, hidden programming
switches are used. There are five of these switches that will be used for the setup of the brewer.
a
b
c d e
a) Right Programming (hidden) switch (just to the right of the display): This is used to access the program-
ming mode, and is also used to scroll forward through the function list.
b) Left Programming (hidden) switch (just to the left of the display): This is used to scroll backwards through
the function list.
c) Digital: This is used to select options that appear on the display during programming.
d) Brewer: This is used to select options that appear on the display during programming.
e) Control: This is used to select options that appear on the display during programming.
ENABLE
ON / OFF
ENABLE
ON / OFF
BREWBREW
SMALL
LARGE
SMALL
LARGE
BREW
BREW
READY TO BREW
WATER TEMP: 200°
PROGRAMMING SWITCHES --------------------------- 4
PROGRAMMING THE BREWER ----------------------- 5
FUNCTION FLOW CHART ------------------------------- 6
BREW LOCKOUT ---------------------------------------- 7
SET LANGUAGE ----------------------------------------- 8
UNITS ----------------------------------------------------- 9
SET TEMP -----------------------------------------------10
READY TEMP -------------------------------------------11
BREW SETTINGS ---------------------------------------12
BREW OZ ------------------------------------------------12
% BYPASS ----------------------------------------------13
BREW METER -------------------------------------------14
PULSE BREW -------------------------------------------15
DRIP TIME ----------------------------------------------17
REFILL ---------------------------------------------------19
FLOW RATES -------------------------------------------- 20
CALIBRATE FLOW --------------------------------------21
BREW COUNTERS --------------------------------------24
ENABLE ADS --------------------------------------------25
ENABLE CLEAN -----------------------------------------27
ENABLE ENERGY SAVER ------------------------------28
ENABLE FRESHNESS TIMER -------------------------29
ASSET NUMBER ----------------------------------------30
SERVICE NUMBER -------------------------------------31
SERVICE TOOLS ----------------------------------------32
FACTORY DEFAULTS -----------------------------------35
DEFAULT SETTINGS ------------------------------------ 36
VIEWING ASSET & SERIAL NUMBER
1. To view the asset number of the machine, press and hold the left hidden switch until the display reads:
ANXXXXXX...ASSET NUMBER. Release the left hidden switch.
2. After a 5 second delay, the display will read: DTTNXXXXXX. This is the serial number of the machine.
41344 112508