Specifications

Page 13
BREW SETTINGS (cont.)
Procedure to set or modify % Bypass settings.
Range: 0 to 90% for both batch sizes
1. Press and hold the right hidden switch until display
reads SET LANGUAGE. Press the right hidden switch
until display reads BREW SETTINGS ?.
2. Press YES to proceed. The display should now
read:
MODIFY, SHOW and NEXT (SINGLE Brewers).
LEFT SIDE, along with MODIFY, SHOW and NEXT
(DUAL Brewers).
3. Press and release the right hidden switch until
display reads % BYPASS XXX.X. A batch light will
be blinking.
4. Using (-) and (+), set the amount of bypass water
(percentage) to be dispensed around the gounds
for that particular batch size.
5. When finished, press the other batch size and repeat
step 4.
6. When finished setting both batch sizes, press DONE.
The display should read 2 BATCHES DONE?
7. If both batch sizes are not correct, press NO to
return to the % BYPASS: setup screen and repeat
steps 4, 5 and 6.
8. If both batch sizes are correct, press YES. This will
advance to:
BREW METER (SINGLE Brewers).
L BREW METER (DUAL Brewers).
To exit to the MAIN SCREEN, press and release the
ON/OFF button (either for DUAL Brewers).
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
L BREW METER X
-
I +
% BYPASS XXX.X
(-) DONE (+)
BREW METER X
-
I +
2 BATCHES DONE ?
NO YES
PRESS AND RELEASE
RIGHT HIDDEN SWITCH
UNTIL DISPLAY READS:
SET BOTH
BATCH SIZES
LEFT SIDE
MODIFY SHOW NEXT
BREW SETTINGS ?
NO YES
MODIFY SHOW NEXT
PRESSING NO WILL
ADVANCE TO NEXT
FUNCTION SCREEN
SINGLE
BREWERS
DUAL
BREWERS
SINGLE
BREWERS
DUAL
BREWERS
41344 112508