Specification Sheet

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
01/26/2022
ICB-DV Tall Platinum Edition, 120V
Server(s) sold separately
4.3" Color Touchscreen aides in customizing recipes, brewing options and control
The Infusion Series® Platinum Edition relies on the powerful duo of the Peak
Extraction Sprayhead and SmartWAVE® technology to further enhance the
uniformity of extraction and resistance to limescale buildup.
USB programming for uploading and downloading recipes and software updates, all
in less than a minute
Brews into 2.5 to 3.8L (84 to 128 oz) airpots and 3.8 to 5.7L (1 to 1.5 gallon)
Thermofresh servers
BUNN Infusion Series technology allows for multiple recipes from one footprint
Energy-saver mode reduces tank temperature during idle periods
Electronic funnel lock prevents removal of the brew funnel until drip- through is
complete
Brew counter keeps track of how many batches are brewed
Pre-infusion and pulse brew for maximum flavor extraction. Cold brew lockout &
digital temperature control further ensure top-notch brewing
Hot water faucet (supplied for custom installation)
Dual voltage adaptable (Can operate at 120V/15 amp or 120/208-240V/20 amp)
Optional BUNNlink® remote monitoring support (kit required)
Agency:
Specifications Additional Features
53300.0101Product #: BrewWISE
PlumbedWater Access:
Wireless
Interface:
Stainless
Finish:
Height: 35.0" Width: 10.2" Depth: 22.1"
(88.9cm) (25.9cm) (56.1cm)
Electrical & Capacity
Volts* Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 14 1700 Yes NEMA 5-15P 82
60°F (15.5°C)
1 2 60
120/208
14 2900 -
N/A
136
60°F (15.5°C)
1 3 60
120/240
17 4050 -
N/A
181
60°F (15.5°C)
1 3 60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
3/8" Male Flare Fitting
1.00
2D
Revit
KLC
•
This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov
WARNING: