Product Specifications Sheet
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
04/21/2020
BUNN refresh -CT Push Button Black
Provides one push-and-hold button for Still water, and one push-and-hold button for
Sparkling water
In-line patent-pending water mistifier provides the delicate balance of purified, cold
water and "light" carbonation for longer lasting sparkling water and optimal
absorption of flavors
Recirculation loop ensures cold water is constantly circulating for consistent low
casual drink temperature of 40°F water
One water filtration system included. Purity achieved with water filtration
technology certified to reduce cysts, lead, particulates, chloramines, chlorine taste
and odor and up to 99.99% of common water- borne bacteria
The perfect instrument to incorporate infusions and natural ingredients for crafted
beverages
Recommended for the Quick Serve, Full Service Restaurant, Healthcare, College
and University, Amusement and Leisure, Office Systems, Lodging/Hospitality,
Convenience Store and Specialty/Retail Bar channels
New visual design language worthy of front-of-the-house settings
At a rate of one 12oz drink per minute, can dispense 60 drinks before exceeding
41˚F (with 75˚F incoming water)
Agency:
Specifications Additional Features
45800.0000Product #: Push Button
Dispense:
PlumbedWater Access:
Black
Finish:
Side HingeDoor:
Height: 26.9" Width: 10.0" Depth: 28.1"
(68.3cm) (25.4cm) (71.4cm)
Electrical & Capacity
Volts* Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 5.2 540 - - -
60°F (15.5°C)
1 2 60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
30-100 207-689
3/8" Male Flare Fitting
1.40
2D
Revit
KLC
• • •




