Specifications Sheet
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Created on:
09/08/2018
My Cafe AutoPOD
15.8" x 15.2" x 9.7"
(40.1cm x 38.6cm x 24.6cm)
Integrated cup booster allows for 5” or 8” (12.7cm or 20.3cm) cup
clearance
Energy-saver mode reduces tank temperature during idle periods
Recipe labels provided allow for customization of beverages
dispensed
Pod bin and drip tray can be modified for under-counter disposal of
pods
Jet-action sprayhead design allows for proper extraction of all
flavoring materials and aromatics
Works with Shurflo or Flojet pump system
New single tank pump design provides consistent brew quality on
varying water pressures
Control extraction utilizing pulse-brew technology with
BrewMETER®
Eliminates waste by brewing one fresh cup at a time from a wide
variety of coffee and tea pods
Push and hold hot water button provides up to 10oz (296mL) of hot
water for cappuccino, cocoa and soups
Removable pod bin holds up to 25 spent pods
Automatically disposes of spent pods after each brew
Agency:
Specifications Additional Features
42300.0000Product #:
PlumbedWater Access:
Electrical & Capacity
Volts Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 11.9 1425 Yes NEMA 5-15P 60
60°F (15.5°C)
1 2 60
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
1/4" Male Flare Fitting
-
2D
Revit
KLC
•




