Spec Sheet

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Created on:
10/14/2016
FMD-3 Black
30.0" x 23.3" x 11.3"
(76.2cm x 59.2cm x 28.7cm)
Servers and airpots sold separately
Adjustable legs and drip tray accommodate 20oz (.59L) mugs
easily
Attractive high-impact resin door is dent and scratch resistant
Electrical and plumbing components easily accessible through
front and top
High speed heavy-duty whipper for complete product mixing
Improved automatic rinsing of whipper reduces run-on after
beverage is dispensed
Large easy-to-fill translucent hoppers hold 4lb (1.81kg) of product
each, ensuring quick and timely refilling
Lighted front graphics for merchandising are easy to exchange:
cappuccino or soup
Variable speed motors allow control of product consistency in
mixing chamber (.75 to 6.6 grams of powder per second)
Agency:
Specifications Additional Features
SET00.0199Product #: Side HingeDoor:
PlumbedWater Access: Push Button
Dispense:
Black
Finish:
ThreeHoppers:
LitDoor:
Electrical & Capacity
Volts Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 15 1800 Yes NEMA 5-15P 83
60°F (15.5°C)
1 2 60
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
1/4" Male Flare Fitting
-
2D
Revit
KLC

Summary of content (4 pages)