54000.0100
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
09/22/2021
ITCB Dual-Volt High Volume, PE
Server(s) sold separately
4.3" Color Touchscreen aids in customizing recipes, brewing options and control
The QWERTY key pad feature allows for easy customization of recipe names in
English, Spanish and French
SmartWAVE sprayhead technology provides enhanced uniformity of extraction and
lime scale reduction
Customers can easily add up to 10 screensaver images to advertise and promote
their brand and products
Brews into 1.5 gallon and 1.0 gallon BUNN ThermoFresh® servers for coffee and
TD4T, TDO and TDO-N tea dispensers
Dilution feature also allows for brewing iced coffee
Includes both coffee (Stainless) and tea (Plastic) funnels
Tea brewing capability built-in with integrated dilution nozzle, software and Quick
Brew tea brewing funnel
BrewWISE® intelligence with pre-infusion and pulse brew for maximum flavor
extraction
Digital temperature control and cold brew lockout
Energy-saver mode reduces tank temperature during idle periods
Large 3gal (11.4L) tank provides back-to-back brewing capacity
Dual voltage adaptable (Can operate at 120V/15 amp or 120/208-240V/20 amp)
PROP 65 Warning Decal included in packaging with equipment
Agency:
Specifications Additional Features
54000.0100Product #: Stainless SteelFunnel:
PlumbedWater Access: Translucent Tea FunnelFunnel:
Wireless
Interface:
Stainless
Finish:
Height: 35.0" Width: 10.0" Depth: 24.3"
(88.9cm) (25.4cm) (61.7cm)
Electrical & Capacity
Volts* Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 14 1700 Yes NEMA 5-15P 82
60°F (15.5°C)
1 2 60
120/208
14 2900 -
N/A
136
60°F (15.5°C)
1 3 60
120/240
17 4050 -
N/A
183
60°F (15.5°C)
1 3 60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
3/8" Male Flare Fitting
1.25
2D
Revit
KLC
•
This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov
WARNING: