52000.0100

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
07/20/2021
ITB
Server(s) sold separately
Sleek, modernized design language on the brewer, with rounded angles on the
corners and trunk
Digital readout displays in English, Spanish, or French ---for easier programming
and control--- and can show either 'Standard' or Metric measurements. Digital
readout also shows machine status, and targeted advertising messages can be
programmed for display.
BUNN Infusion Series technology allows for multiple recipes from one footprint ---
with three brew buttons and two batch sizes
Easy pulse display allows for simplified programming of pulse routine
Energy-saver mode reduces tank temperature during idle periods
Exclusive Peak Extraction™ Sprayhead is multi-directional with a 7-hole design to
ensure ultimate uniformity of extraction
Electronic funnel lock prevents removal of each brew funnel until drip- through is
complete
USB programming capable
Brew counter keeps track of how many batches are brewed
Pre-infusion and pulse brew for maximum flavor extraction. Cold brew lockout &
digital temperature control further ensure top-notch brewing.
Includes overlay kit for customization of brewer interface
Agency:
Specifications Additional Features
52000.0100Product #: Funnel Locks
PlumbedWater Access:
Stainless
Finish:
Translucent Tea FunnelFunnel:
Height: 35.0" Width: 11.6" Depth: 23.7"
(88.9cm) (29.5cm) (60.2cm)
Electrical & Capacity
Volts* Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 14 1700 Yes NEMA 5-15P 336
60°F (15.5°C)
1 2 60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
1/4" Male Flare Fitting
1.25
2D
Revit
KLC
This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov
WARNING:

Summary of content (4 pages)