51600.0022
BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
08/13/2021
NITRON® Cld Drft All Nitro 4:1-12:1 wRDG
Tank Regulator Required
11" x 6.5" graphic panel on the LED-lighted door can easily be changed - without
tools- to promote unique brands or beverage offerings
Serve two different coffees or teas as nitrogenated beverages using 1- gallon
concentrate BIBs or refillable containers
Patented BUNN gas infusion technology can produce up to 3 minutes of cascading
micro-bubbles
Patented High Intensity® mixing chamber assures a perfectly blended finished
beverage, from cup to cup
Mounted on standard 3/8"-16 UNC threads, chrome plated brass tap handles are
interchangeable with custom handles for a more personalized look
Automatic water bath fill maintains water bath level for optimal cold beverage
capacity
Flashing red LED light on door alerts the operator when to replenish nitrogen tank
At a rate of one 16oz drink per minute, can dispense 60 drinks before exceeding
41°F (using 75°F incoming water)
Refrigerated product cabinet protects flavor integrity and product life
Large dispense area accommodates taller cups and carafes up to 8.76"
Service-friendly design makes set-up and maintenance simple
Agency:
Specifications Additional Features
51600.0022Product #: PlumbedWater Access:
2 FlavorsFlavors: Black
Finish:
4:1-12:1
Product Ratio:
LitDoor:
Ball-valveConnector: R-134A
Refrigerant:
Height: 34.0" Width: 9.8" Depth: 29.8"
(86.4cm) (24.9cm) (75.7cm)
Electrical & Capacity
Volts* Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 6 720 Yes NEMA 5-15P -
60°F (15.5°C)
1 2 60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
30-90 207-621
3/8" Male Flare Fitting
0.94
2D
Revit
KLC
•
WARNING: