44400.0101

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
09/21/2021
Sure Immersion® 220 120/208V Prtr Port
Filter style coffee from a vacuum system with Air Infusion extraction control,
resulting in a clean balanced cup with a smooth finish
Two independent grinders with precision burrs for accurate grind profiles
Beverage selections include Hot and Iced options
Each recipe has programmable Air Infusion and Immersion Control for the ideal
result in the cup
Dispenses fresh coffee by the cup or by the carafe
5.75" to 8.25" cup clearance
Two tinted 3lb hoppers allow customers to view fresh whole beans
Beautiful 10" full color touchscreen with the ability to show promotional videos
Large pictorial graphics provide an engaging drink selection
Step-by-step pictures guide the operator through proper cleaning techniques for
dependable performance
Optional BUNNlink® remote monitoring support and over-the-phone diagnosis and
repair is available
Optional cashless reader from USA Technologies works with credit cards, debit
cards, NFC and mobile wallets
Printer not included. POS printer must operate on the RS-232C standard and have
a 25-pin serial connector (dB-9 at machine)
Agency:
Specifications Additional Features
44400.0101Product #: Hot Water Button
PlumbedWater Access:
Stainless/Black
Finish:
4" Black LegsLegs:
Height: 39.4" Width: 16.1" Depth: 19.8"
(100.1cm) (40.9cm) (50.3cm)
Electrical & Capacity
Volts* Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120/208
14.0 2900 Yes NEMA L14-20P 63
60°F (15.5°C)
1 3 60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
1/4" Male Flare Fitting
1.00
2D
Revit
KLC
WARNING:

Summary of content (4 pages)