Spec Sheet

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Created on:
11/16/2016
iMIX-14
32.6" x 24.0" x 19.2"
(82.8cm x 61.0cm x 48.8cm)
Servers and airpots sold separately
7” diagonal touch screen communicates advertising messages,
machine status, technical support contact information and provides
programming for settings and service adjustment.
Cup clearance at 6.75” (17.1cm) to accommodate popular cup
sizes
Front of machine access for set up and calibration, tank drain,
dump valves, auger and whipper motors and control board for easy
service
Interchangeable LED backlit display
Requires special powder products (contact your BUNN Sales Rep).
Serves up to 14 hot beverages plus hot water dispense
RPM feedback monitoring on auger motors assure consistent
flavors and profits by controlling powder dosing
7gal (26.5L) hot water tank to meet peak serving times
Low product detection system alerts audibly and with message on
display when hoppers are low
Night mode to prevent pilferage
Spring-loaded, all metal auger drive system for easy hopper
installation
Agency:
Specifications Additional Features
43800.0102Product #: Push Button
Dispense:
Black
Finish:
PlumbedWater Access:
SixHoppers:
Top HingeDoor:
Portion Control
Dispense:
Electrical & Capacity
Volts Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 15 1800 Yes NEMA 5-15P 67
60°F (15.5°C)
1 2
50/60
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-100 138-689
1/4" Male Flare Fitting
-
2D
Revit
KLC

Summary of content (4 pages)