Spec Sheet

BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Created on:
11/16/2016
ITCB-DV-HV
34.4" x 23.8" x 10.1"
(87.4cm x 60.5cm x 25.7cm)
Servers and airpots sold separately
Brews into 1.5gal and 1.0gal BUNN ThermoFresh® servers for
coffee and TD4T, TDO and TDO-N tea dispensers
Dilution feature also allows for brewing iced coffee
Includes both coffee and tea funnels
Tea brewing capability built-in with integrated dilution nozzle,
software and Quick Brew tea brewing funnel
BrewWISE® intelligence with pre-infusion and pulse brew for
maximum flavor extraction
Digital temperature control and cold brew lockout
Compatible with BUNNlink®
Digital display in English/Spanish for easier programming and
control. Advertising messages and machine status also displayed.
Display capable of showing English or Metric measurements.
Energy-saver mode reduces tank temperature during idle periods
Includes overlay kit for customization of brewer interface
Three brew buttons allow for 3 separate brewing profiles. Two
programmable batch switches allow full and half batch brewing.
Large 3gal (11.4L) tank provides back-to-back brewing capacity
Dual voltage adaptable (Can operate at 120V/15 amp or
120/208-240V/20 amp)
Agency:
Specifications Additional Features
43000.0000Product #: VariableFaucet: Quickbrew Funnel Tip
PlumbedWater Access: Quick Brew
Stainless
Finish:
Smart FunnelFunnel:
Translucent Tea FunnelFunnel:
Electrical & Capacity
Volts Amps Watts
Cord
Attached
Plug Type
8oz cups/hr
236ml cups/hr
Input H²O
Temp.
Phase
# Wires
plus Ground
Hertz
120 14 1700 Yes NEMA 5-15P 336
60°F (15.5°C)
1 2 60
120/208
14 2900 -
N/A
1088
60°F (15.5°C)
- - -
120/240
17 4050 -
N/A
1512
60°F (15.5°C)
- - -
Plumbing Requirements CAD Drawings
PSI kPa
Fitting Supplied
Water Flow Required (GPM)
20-90 138-621
3/8" Male Flare Fitting
-
2D
Revit
KLC

Summary of content (6 pages)