Manualshelf

Use and Care Manual

ManualsBrandsBullyliner ManualsAutomotiveEnvironmentally Friendly Water Based Rubber Truck Bed Liner in Black (4-Box)
12345678910
3
Bullyliner is a registered Trademark All rights reserved.
A.
PREPARATION OF TRUCK BED (And any painted metals and fiberglass surface)
1. The surface must be clean, dry and free of oil & dirt.
2. Wash with soap and rinse with high pressure nozzle. Then let dry.
3. Use a bowl with acetone and 3M (green) Scotch Brite pad or fine sand paper.
4.
Scuff the surface down using the Scotch Brite. Scuff the shine down to a dull matte finish.
(There’s no need to sand down to bare metal, light sanding is also recommended).
5.
After scuffing, wipe off the sanded white powder with a clean rag & acetone.
NOTE: Bully Liner will not bond to oil, grease or powder.
Bully Spray Gun available
separately