Use and Care Manual

11
Rude Dog Pty Ltd 27 High Street, Kippa Ring, QLD, Aust, 4021. All rights reserved.
G. Bully Pressure-Pot Spray System (Cont.)
4.
When surface becomes tacky, spray second coat. Extreme climatic conditions of heat, humidity and
cold The first coat should be dry to the touch within one hour and cured in 12-24 hours.
5. The more time between the final coat of BULLYLINER and the topcoat, the quicker BULLYLINER
will harden for heavy use. For best adhesion, apply topcoat to BULLYLINER surface within 24 hours.
NOTE: TWO COATS OF BULLYLINER ARE REQUIRED FOR ADEQUATE COVERAGE.
6. After second coat is dry to the touch, check for any missed
spots and touch up.
7. Install tailgate and hardware.
8. The truck bed will be ready for light use in 10-12 hours.
9. Clean all tools using water before BULLYLINER has dried.
H. PRECAUTIONS
Avoid contact with skin and eyes. Can cause irritation. AVOID BREATHING VAPOR. USE IN A WELL VENTILATED
AREA. May cause coughing and lung irritation, headache, dizziness, nausea. Harmful or fatal if swallowed. If
swallowed, contact doctor or poison control center. Do not induce vomiting. Give a glass of water. If skin contact occurs,
wipe clean with Xylene (Xylol) before BULLYLINER dries. Remove contaminated clothing and wash skin thoroughly
with soap and water.
WARNING: KEEP OUT OF REACH OF CHILDREN.