Instructions / Assembly

BROADFORK WITH FIBERGLASS

HANDLES ASSEMBLY GUIDE

RECOMMENDED TOOLS

2 SETS OF PLIERS

*FOR THESE INSTRUCTIONS, WE USED A PAIR OF NEEDLE NOSE PLIERS AND A 14-mm SOCKET WRENCH

INCLUDED

BROADFORK HEAD

2 BROADFORK HANDLES

4 BOLTS

4 LOCKING NUTS

PAGE 1
BROADFORK WITH FIBERGLASS HANDLES ASSEMBLY GUIDE RECOMMENDED TOOLS 2 SETS OF PLIERS *FOR THESE INSTRUCTIONS, WE USED A PAIR OF NEEDLE NOSE PLIERS AND A 14-mm SOCKET WRENCH INCLUDED BROADFORK HEAD 2 BROADFORK HANDLES 4 BOLTS 4 LOCKING NUTS
PAGE 2
BROADFORK ASSEMBLY GUIDE - STEP 1 ALIGN HANDLE HOLES WITH THE HOLES ON THE BROADFORK HEAD (LOGO SHOULD FACE TOWARDS THE LEFT OF THE PRODUCT - SEE IMAGE ABOVE)
PAGE 3
BROADFORK ASSEMBLY GUIDE - STEP 2 INSERT BOTH BOLTS ALL THE WAY THROUGH THE HOLES OF THE HEAD AND THE HOLES OF THE HANDLE UNTIL IT REACHES THE OPPOSITE SIDE
PAGE 4
BROADFORK ASSEMBLY GUIDE - STEP 3 TIGHTEN BOLTS INITIALLY BY HAND, THEN USE PLIERS TO FULLY TIGHTEN HANDLE
PAGE 5
BROADFORK ASSEMBLY GUIDE - STEP 4 REPEAT THE SAME PROCESS FOR THE OTHER HANDLE (LOGO ON GRIP SHOULD ALSO FACE THE LEFT)