Owner's manual

RAPID FLOW INSTALLATION

Rapid Flow Exhaust # 82410

2. Hang each of the hangers. Hanger A is on the Down

Pipe, Hanger B and C will serve a dual purpose, serv-

ing as both hangers and clamps. Hanger B will be at

the front of the Muer and Hanger C will be at the

rear of the Muer. Hanger D will hold the Tail Pipe

Tip.

3. Install the Down Pipe by hanging it from the hanger

and securing it to the turbo with the stock band

clamp. When installing the Down Pipe in order to

get it to seal correctly with the turbo, do not put

hanger A on until you have a good seal on the turbo.

Once you have the down pipe on the turbo sealed

correctly then attach hanger A to the down pipe.

4. Weld Catalytic converter to the downpipe.

5. Weld Straight pipe to Catalytic converter.

Hang the Hangers

Hanger C

Hanger B

Install Down Pipe

Down Pipe

Stock Band Clamp

Loosen Bolt if Necessary

Down Pipe

Hanger A