Owner manual

RAPID FLOW INSTALLATION

Rapid Flow Exhaust # 82223

QUICk OVERVIEw FULL EXHAUST

Muer

Driver Tail Pipe Tip

24” Straight Pipe

Driver Front Piece Tail Pipe

48” Straight Pipe

Down Pipe

Passenger Front Piece Tail

Pipe

Passenger Tail

Pipe Tip

Y-Pipe

CLAMP AND HANGER PLACEMENT

Hanger C

Hanger A

Hanger D

Hanger B

Clamp

Clamps

Hanger E

In these steps you will install the Rapid Flow Exhaust System. Bully Dog’s Exhaust Systems are one-

cut systems, meaning that you should only have to cut one pipe or less if installed correctly.

1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a

large at surface to acknowledge the location of each piece

Tool s Needed:

Silicone Spray Lubricant•

9/16” Wrench•

7/16” Deep Socket•

Socket Wrench•

Tape Measure•

INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM