User Manual

1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions for
the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake for
2004 and newer 5.6L Nissan Titan trucks and Armada SUVs.
Installation requires a few basic tools and takes about 20
minutes.
Table of Contents
Parts ..................................................................... 1-4
Installation ............................................................ 5-14
Maintenance ........................................................ 15-16
Parts Included
RFI Lid .................................................................. (54100-1)
RFI Base ............................................................... (54100-2)
RFI MAF Tube ...................................................... (54100-3)
Stage 2 RFI Tube ................................................. (54200-3)
Silicone Coupler – Straight .................................. (54200-5)
Silicone Coupler – Hump ..................................... (54200-7)
Silicone Hose (2) .................................................. (54200-6)
Air Filter with Band Clamp ................................... (54100-5)
4” Worm Drive Band Clamp (4) ............................ (51105-7)
#8 Hose Clamp (4) ............................................... (10800-4)
16 mm Barb Connector (2) .................................. (54200-94)
Black Oxide Phillips Screw (2) ..............................(54100-94)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• 10 mm socket
• Bit driver
• Pliers