User Manual

RFI COLD AIR INTAKE

5. Reinstall the engine cover.

a. Pop the cover onto the rear grommets.

b. Tighten the bolts back into place. (Use a 10 mm

socket.)

6. Install the air lter.

a. Slide it over the end of the MAF tube that is inside the

RFI enclosure base.

b. Tighten the band clamp. (Use a at-head screwdriver.)

7. Install the RFI lid.

a. Make sure the lid is properly aligned.

b. Snap the latches over the mounts on the lid.