User Manual

RFI COLD AIR INTAKE

2. Secure the RFI enclosure base into the engine bay with

stock bolt A (step 6, page 7) and a 10 mm socket.

3. Connect the Stage 2 RFI tube to the RFI MAF tube and

throttle body with the couplers.

• Leave the band clamps loose.

4. Install the 16 mm hoses.

a. Insert a barb connector into each CCV tube.

b. Slide the other end of each 16 mm tube over one of the

nozzles on the Stage 2 RFI tube.

c. Move the spring clamps back into place. (Use pliers.)