User guide

12
RFI COLD AIR INTAKE
Filter Maintenance
The intake system should be cleaned with the Bully Dog RFI
Cleaning Kit at least once every three months; in dusty climates,
theltershouldbecleanedmoreoften.Cleaningtheintakeisa
twopartprocess:cleaningandoilingthelter.
(1) Cleaning the Filter
1. RemovethelterfromtheRFIenclosure.
Clean the enclosure if necessary.
2. Remove surface dirt (this step can be
avoidedifaBullyDogRFIPrelterhas
been installed).
•Lightlytapthelter.
•Use a soft-bristle brush to remove any
loose particles.
3. Spray the cleaner generously over the
lterandletitsoakfor10minutes.
4. Thoroughlyrinsethelter.
•Use regular tap water.
•Avoid high-pressure hoses.
•Preventdirtfromenteringthelterbyrinsingfrominside
out or from the clean side to the dirty side.
5. Letthelterairdry.
•Do not use any method to speed up the drying process.
•Usingablowdryerorcompressedaircandisgurethe
lterandallowparticlestopassthrough.
(2) Oiling the Filter
1. Apply a small amount of oil to the soft-bristle brush and
gentlyspreadtheoiloverthelter.Besuretoapplyonly
asmallamountofforcesothelterisnotdamaged.
PART # 229000