User guide

6
8. Insert module female plug into fuel rail pressure
sensor.
9. Connect the module male plug to the tractor female plug.
10. Use zip ties to secure the Rapid Power cable to the
tractor wiring harness. Be sure the cable will be safe from moving parts (such as the starter/ywheel) or hot
exhaust system parts. Zip tie the module box to the cable harness as shown.
Fuel Rail Sensor Female Plug
Module Male Plug
Module Female Plug
Fuel Rail Sensor Plug
RPM INSTALLATION
Warning: Do not remove
module while tractor is
running. Shut down machine
and then remove module.