Manual

3
Sensor Docking Station
40385 (O
2
sensor support - Pyrometer not included)
Sensor Docking Station O
2
Support and Power Harness ..... (4-40385)
Ring Terminal ....................................................... (40383-4)
Fuse Tap ............................................................... (40400-20)
Spade ................................................................... (40400-21)
Dielectric Grease ..................................................(40383-3)
2″ Square Hook and Loop Fastener .....................(40390-94)
Zip Ties (6)............................................................(1-NYTIE6)
Tools Needed (Italic tools are required only for pyrometer installation)
• Crimpers
• Drill
• 5/16″ Drill Bit
• 1/8″ Pipe Tap
• 9/16″ Wrench
• 5/8″ Wrench
Recommended Sensors
• Additional Bully Dog Pyrometer
• Three-wire analog sensor
• Two-wire frequency pulse sensor
• Two-wire 0-5 volt temperature sensor