Manual

37
Sensor Docking Station
Purchasing Compatible Sensors
The only O
2
sensor that the Sensor Docking Station supports
is the Bosch LSU 4.9 wideband O
2
sensor (manufacturer part
#17025). If you are installing in a new location (rather than
replacing a stock sensor), you will also need to purchase a
bung; you can request a standard O
2
bungfromanymuer
shop or purchase an M 18 mm x 1.5 mm threaded bung
fromadierentsource.Thissensorisavailableonlineat
www.bullydog.com (part #40388).
The only pyrometer that the Sensor Docking Station supports
is manufactured by Bully Dog (part #40387). It is available
online at www.bullydog.com.
For all other sensor types, the Sensor Docking Station will
supportsensorsmadebydierentmanufacturers.Goto:
http://www.bullydog.com/documents/SensorsForSensorDockingStation.xlsx
for a list of recommended sensors.
NOTE: The list is not exclusive. The sensors included in the
list are intended as examples; other sensors will also work
with the Sensor Docking Station if the requirements are met.