Instruction Manual

7
Introduction PMT Installation Operating Instructions Internet Updates Appendix
Custom A-Pillar Mount Assembly
This mounting assembly enables the PMT to be mounted on the Custom A-Pillar Pod on the driver’s side of
the vehicle. Using this mounting style does require that a Custom A-Pillar Pod be purchased from Bully Dog,
but it also oers the cleanest install.
The Custom A-Pillar Mount Assembly includes:
• Front Mounting Plate
• Back Mounting Plate
• (4) Mounting Screws
USB to SD Card Adapter
This Card Reader is used to update the PMT’s SD memory card . It is used primarily for internet updates.
PARTS DESCRIPTION
Parts Description