Instruction Manual

Introduction Parts Description PMT Installation Operating Instructions Internet Updates

SECTION 4: PMT TROUBLESHOOTING

CONDITION POSSIBLE SOURCES ACTION

PMT will not turn on Installation/ Connections

Make sure that the fuse jack is securely fastened to the

fuse socket.

Check that the fuse is working properly.

Make sure that all of the harnesses are properly installed. If

still not working, one of the harnesses could be defective.

Will only display pyrometer Improper Truck Selection

Check and ensure the proper truck is selected.

Make sure you have proper connections everywhere.

Also, make sure that there are no bent pins in any of the

connectors.

Will not adjust horsepower Improper Truck Selection Check and ensure the proper truck is selected.

Back light quit working Loose Connections

Contact Technical Support if the PMT is otherwise functio-

ning normal.

PMT will not display proper

temperature EGTs

Pyrometer Probe

Connections Incorrect

Check the orientation of the Pyrometer connections on

the PCH to ensure that the Pyrometer leads are properly

connected.

For more information on up-to-date troubleshooting guide for the PMT, go to

www.bullydog.com/Product_Updates.php

PMT ERROR CODES:

For error code information regarding any error codes that appear while operating the PMT visit the

web address below:

www.bullydog.com/PMT_Tech.php

APPENDIX

Appendix