Owner's manual
2
INTrOduCTION
Introduction: The following instruction set covers installation and maintenance of the Rapid
Flow induction system for ‘94-’97 7.3L Ford Power Strokes. The Bully Dog Rapid Flow Induction
System has been designed to allow more air to ow though your engine. This allows a more
complete burn of the fuel in your combustion chamber which adds additional horsepower and
fuel economy.
RAPID FLOW INDUCTION
BILL OF MATERIALS
RFI Housing
Filter
Band clamp
TOOLS NEEDED
Pliers
Flat head screw driver
10mm End Wrench
PREFILTER RECOMMENDED
Recommended with this kit but not included is a Bully Dog Pre-
lter which can be purchased through a local Bully Dog dealer. A
prelter blocks large particles and insects from becoming lodged
in the lter ribs, this keeps air ow at a maximum and makes
cleaning much easier.
Introduction Stock Removal RFI Installation Filter Maintenece
Troubleshooting/FAQ
Warranty/Disccliamer
Note: This instruction set and the Rapid Flow Induction System included are made exclusivly for the
7.3L Ford Power Stroke ‘94-’97