Owner`s manual

Internal problem detected. Repair required. Contact your authorized dealer or
service organization.
The spa is operating in Standard mode. Temperature display is current after pump has been
running for at least 2 minutes. Press TEMP followed
by LIGHT to switch modes.
The spa is operating in Economy mode.
Ecn will appear solid in the display when the
temperature is not current. Ecn will alternate with the
temperature when the temperature is current. Press
TEMP followed by LIGHT to switch modes.
The spa is operating in Standard-in-Economy
mode.
Operates the same as Standard mode however, it will
revert to Economy mode after 1 hour. Press TEMP
followed by LIGHT to switch directly to Economy
mode.
The spa is in Sleep mode. Press TEMP followed by LIGHT to switch modes.
The spa is in Standby mode. Press any button to leave Standby mode and return to
normal operation.
pH is low. Add pH increaser per manufacturer’s instructions.
pH is high. Add pH decreaser per manufacturer’s instructions.
Sanitizer is low. Add sanitizer per manufacturer’s instructions.
Sanitizer is high Remove spa cover and allow sanitizer to dissipate.
Periodic Reminder Messages (Press the “Mode” button to reset a displayed reminder)
Every 7 days Test and adjust chemical levels per manufacturer’s
instructions.
Every 7 days Test and adjust chemical levels per manufacturer’s
instructions.
Every 30 days Remove, clean, and reinstall filter per manufacturer’s
instructions.
Every 30 days Test and reset GFCI per manufacturer’s instructions.
Drain and refill spa per manufacturer’s instructions.
Every 90 days Drain and refill spa per manufacturer’s instructions.
Every 180 days Clean and condition cover per manufacturer’s
instructions.
Every 180 days Clean and condition cabinet per manufacturer’s
instructions.
Every 365 days Install new filter.
Warning! Shock Hazard! No User Serviceable Parts.
Do not attempt service of this control system. Contact your authorized dealer or service organization for assistance.
Follow all Owners Manual power connection instructions. Installation must be performed by a licensed Electrician
and all grounding connections must be properly installed.
Bullfrog Spas Owner’s Manual
19