User Manual

Technical Specifications
Physical
Configuration Small Handheld Thermal Imager
Weight (w/ battery) 2.4 lbs. (1.09 kg)
Dimensions H 5.4” (137 mm), W 4.6 (117 mm), L 8.2” (208 mm)
Housing Material Ultem
®
Thermoplastic
Upper Housing Colors Red (standard), Metallic Blue, Blue, Yellow,
Lime-Yellow, Orange, White, Black
Lower Housing Color Black
Electrical
Power Source Lithium-ion Rechargeable Battery
Battery Capacity 6400 mAh
Battery Cycles > 800 @ 70% Capacity
Start-up Time < 4 Seconds
Operating Time >6 hours (with or without DVR operating); 7-8 hours
in routine conditions
Recharge Time 5 hours from fully depleted
Infrared Detector
Detector Type Microbolometer
Detector Sensing Material Vanadium Oxide
Detector Resolution 320 x 240 or 240 x 180
Spectral Response 7-14 µ
Update Rate 60 Hz
NETD < 30 mK
Dynamic Range 1100° F (593º C)
Pixel Pitch 17 µm
Video Polarity White-Hot
Lens
Material Germanium
Field of View 31° V x 40° H
Focus 1 m to ∞
Speed f/1.3
Display
Type Digital, Liquid Crystal Display (LCD)
Size 3.5” (89 mm) Diagonal TFT Active Matrix
Pixel Format RGB
Brightness 500 cd/m2 (minimum)
Contrast Ratio 350:1 (typical)
Viewing Angle (Typical) Top = 60°, Bottom = 40°, Left / Right = 60°
Standard Features and Accessories
Temperature Measurement Numeric and Bar Style
Super Red Hot Colorization Engages automatically
above 500°F (260º C)
Optional Features and Accessories (if so equipped)
Electronic Thermal Throttle Blue Hot Spot Colorization (Manually activated)
Digital Zoom 2X/4X
SceneCatcher Digital Video Recorder (DVR)
Video Format NTSC
Video File Type AVI
Video Image Size 720 x 480
Video Record Time 5.5 hours
Connection Micro USB
Retract Strap
Hard Case
Charging Systems
Wireless Desktop Charging System (standard)
Wireless Truck Mount Charger (optional)
Performance
500° F (260º C) Heat Resistance 5 minutes with no damage to electronics
300° F (150 ºC) Heat Resistance 15 minutes of continued operation
with no damage
-4° F (-20º C) Cold Resistance Continued operation
Water Resistance IP67
Impact Resistance 2 meter drops on concrete with no damage
Hazardous Locations
Conforms to ISA STD 12.12.01
CLASS I DIV 2, GROUP A, B, C, D, T6
CLASS II DIV 2, GROUP F & G
ANSI/ISA-12.12.01-2015
CSA-C22.2 No. 60079-0:15
IEC 60079-0:2011, MOD
Encapsulation IP67 (ANSI/IEC 60529)
Radiated Emissions FCC 47 CFR Part 15B EN 55022:2006
Electromagnetic Immunity IEC 61000-6-1:2005 EN 55024:2010
Internal Battery UN/DOT 38.3 IEC 62133 2nd edition
Warranty
Five (5) years on both thermal imager and battery
7
www.bullard.com
Bullard QXT Thermal Imager
User Manual