Product Manual
©2017 Bullard. All rights reserved.
Bullard, Firedome, Sure-Lock, and Hard Boiled are registered trademarks
of Bullard.
Nomex and Kevlar are registered trademarks of E.I. du Pont de Nemours
& Company. Rip-Stop PBI is a registered trademark of Celanese Corporation.
U.S. Patent No. 5,150,479.
6024400041F (0517)
FX and PX models meet or exceed all performance specifications under NFPA 1971-2013.
CERT. MOD.
Americas:
Bullard
1898 Safety Way • Cynthiana, KY 41031-9303 • USA
Toll-free within USA: 877-BULLARD (285-5273)
Tel: +1-859-234-6616 • Fax: +1-859-234-8987
Europe:
Bullard GmbH
Lilienthalstrasse 12
53424 Remagen • Germany
Tel: +49-2642 999980 • Fax : +49-2642 9999829
www.bullardextrem.com
Asia-Pacific:
Bullard Asia Pacific Pte. Ltd.
LHK Building
701, Sims Drive, #04-03 • Singapore 387383
Tel: +65-6745-0556 • Fax: +65-6745-5176
www.bullard.com
www.bullard.com
Firedome
®
FX and PX Series Helmets
FX and PX Series Helmets
WARNING
Firedome helmets are constructed with high-quality materials and workmanship. They are engineered to provide limited protection against head injuries, when
properly adjusted for fit and when worn by firefighters during normal fire fighting activities. They are not designed for direct contact with flames or molten metal,
or for protection against hazardous chemicals, biological, or radiological agents. Contact of these fire helmets with live wires should be avoided. NEVER ALTER OR
MODIFY the helmet’s design or construction without explicit written instructions from Bullard. Firedome helmets should be stored in a cool, dry place, away from direct
sunlight. Inspect your helmet and suspension system regularly, regardless of how often it is used. If you notice any sign of wear, damage, abuse, or environmental
degradation, replace the shell and/or suspension immediately. If the helmet has sustained a forcible blow (impact), it must be replaced, even if there is no visible
damage. Failure to observe these warnings and avoid potentially hazardous situations could result in death or serious injury. FX and PX models meet or exceed all
performance specifications under NFPA 1971-2013.