User Manual

Guidance for Selecting LF-Series Hood
The LF-Series hood is available in two (2) widths and three (3) sizes in each width to accommodate various face and head sizes for maximum comfort and
protection.
The 20LFHE hoods have a built-in PTFE-based HEPA panel along the jaw of the hood. It is intended to block large-particle droplets, splashes, sprays, or
splatter from entering the hood.
The comfort-fit, designated by 20LFHE, has a wider profile while the contour-fit, designated by 20LF2HE, has a narrower profile.
If using the LF-Series hood, select the size that fits most comfortably and where the entire elasticized edge of the faceseal contacts your face. For additional
guidance, refer to the LF-Series Sizing Chart (below) to further match your face shape and head size. If your proper fit falls between two (2) sizes, default to
the smaller size to ensure a snug fit.
www.bullard.com
6
Step 1: Face Shape Step 2: Head Diameter
Option 1:
hat size US size (EU size)
Option 2: measure
circumference at forehead (cm)
20LFMHE
square/round 7 ¼ - 7 ¾ (58 – 62) 57 – 62
20LFLHE
square/round 7 3/8 - 8 (59 – 64) 58 – 65
20LFXLHE
square/round 7 ¾ - 8 (62 - 64) 61 – 69
20LF2SHE
narrow 6 5/8 - 7 3/8 (53 – 59) < 55 – 59
20LF2MHE
narrow 6 7/8 - 7 5/8 (55 – 61) 55 – 61
20LF2LHE
narrow 7 ½ - 8 (60 – 64) 59 – 66
Square/Round
jaw line across mouth
greater than or equal
to width across eyes
Narrow
jaw line across mouth
less than width
across eyes